How to Make Hemp Rosin Carts from Scratch

As the world of cannabis and hemp products evolves, DIY enthusiasts are turning their attention to crafting their own hemp rosin-based products. This comprehensive guide is designed to walk you through the process of making hemp rosin carts, building a rosin press, and producing rosin hash from scratch, tapping into the growing trend of homemade cannabis products.

DISCLAIMER: Please be aware that CBD comes with potential risks and uncertainties. Before use, carefully read our full disclaimer HERE to understand the nature of CBD, potential health risks, unproven claims, quality concerns, and more.

Understanding Hemp Rosin

Rosin is a solventless extract that’s gaining popularity due to its purity, terpene content and potency. Unlike other cannabis extracts, rosin is made by applying heat and pressure to kief or ice water hash, which releases a resin rich in cannabinoids and terpenes. This guide will delve into three key aspects: creating rosin carts, building a rosin press, and making rosin hash.

How to Make Hemp Rosin Carts

1. Materials and Equipment Needed: High-quality hemp flower, rosin filter bags, rosin press, cartridge, and heating kit.
2. Perform a solvent free extraction through mechanical separation to produce kief, or use ice water extraction for bubble hash. High quality flowers can also be pressed, but this method will take many more presses’ to get a usable quantity.
3. Step-by-Step Process: Press the kief, flower, or hash using the rosin press, collect the extract, and prepare it for the cart.
4. Filling and Sealing the Cartridges: Use a syringe to fill carts ensuring there are no air bubbles.
5. Tips for Preserving Quality: Store in a cool, dark place to maintain potency.

How to Make a Rosin Press

1. Materials and Tools: Heat plates, hydraulic press, temperature controller, and other hardware.
2. Building and Assembling: Attach heat plates to the hydraulic press and wire the temperature controller.
3. Calibration and Safety: Test the press with small amounts, ensuring even heat distribution.
4. Testing and Fine-Tuning: Adjust pressure and temperature for optimal yield. Low temperatures will help you retain the maximum amount of terpenes, target temps between 140-180 degrees fahrenheit.

How to Make Rosin Hash with Hemp

Using Rosin to Create Hash Oil: The first step in making rosin hash oil is to ensure high-quality rosin is being used. This starts with selecting top-grade hemp rich in cannabinoids and terpenes. The quality of the hemp directly influences the potency and flavor profile of the rosin, and consequently, the hash oil produced.

 

Step-by-Step Guide:

1. Apply heat and pressure: Using the rosin press, apply controlled heat and pressure to the hemp material in a filter bag, inside a sheet of parchment paper.  This process melts the waxy outer layer of the resin gland and presses out the cannabinoids and terpenes inside forming the basis of hash oil for the carts. The filter bag should be 75-90 microns to ensure the extract is as clean as possible.
2. Collection: Once the rosin is extracted, use a non-stick tool to collect it off the parchment paper. A tip from the Pros is to throw it in a freezer or cold temperatures to make the rosin easier to pull off the parchment paper. Be gentle and patient, as the rosin can be very sticky. Use the collection tool to collect the rosin by globbing it together.
3. Refinement: After collection, refine the rosin further to remove any remaining chlorophyll, waxes, or lipids. This has to be done in order for the rosin to be liquid or thin enough to work in a cart.  It can be done through a process called “winterization,” which involves dissolving the rosin in food grade alcohol and then freezing it to separate out the fats and waxes. Mix Everclear at a 10:1 ratio, 10 being the alcohol, 1 the rosin. Heat the mixture at a very low temperature, when the fats and liquid begin to separate, pull the mixture off the heat source and put it in a freezer.  The colder temperatures will cause the liquid rosin to rise to the top of the mixture. Then use a syringe to pull off the liquid rosin oil.  To remove the last of the alcohol, stir the liquid mixture at a very low temperature to evaporate any alcohol left in the mixture. A vacuum pump and an enclosed container can be used to achieve the purest form.

Filling your Carts:

1. Look online for empty vape carts, we suggest 510 threaded half or full gram CCell empty cartridges. When you receive your new cartridges unscrew the mouthpiece. Put the liquid rosin on a heating pad to make the liquid thinner and easier to work with.  Using a syringe with a needle at the end, suck up the rosin oil and insert into the vape cart. Make sure not to overfill the vape cart or it can get extremely messy. After the vape cart is full, you can now screw the mouthpiece back on tight, and now you have made your very first cart. Enjoy!

Storage and Preservation:

1. Airtight Containers: Store your rosin hash in airtight containers. This prevents air exposure, which can degrade the cannabinoids and terpenes.
2. Cool and Dark Place: Keep your storage containers in a cool, dark place like a cupboard or drawer. Excessive heat, and light will cause oxidation to occur which will degrade its quality.

By following these detailed steps and techniques, a high-quality rosin hash will be created that preserves the essence of the chosen hemp strain, offering a potent and pure experience. Remember, patience and attention to detail are key in the art of hash making.

Tips for Quality Control

Consistency: Maintaining consistency in the rosin products is crucial for both personal satisfaction and, if applicable, customer trust. Consistency starts with the quality of the hemp. Always source your hemp from reliable suppliers, ensuring it is of a similar quality with each batch. Create a standardized process for temperature, pressure, and timing when pressing rosin. Documenting each batch’s specifics helps in replicating successful outcomes and understanding variances when they occur.

Quality Testing: Regular testing of your rosin for purity and potency is essential, especially when considering commercial distribution. Testing can be done in a laboratory setting or at home using available test kits. Key aspects to test for include cannabinoid profile (especially CBD and THC levels), terpene profile, and any potential contaminants. Understanding the chemical makeup of your rosin ensures that you are consuming or selling a safe, high-quality product.

Troubleshooting: Being adept at troubleshooting common issues can significantly enhance the quality of the rosin.

• Uneven Pressing: This often results from uneven heat distribution or improper alignment of the press plates. Regularly inspect and calibrate your rosin press to ensure even pressing. Experiment with different pressures and heat settings to see what works best for the specific hemp strain you are using.
• Low Yields: If the yields are lower than expected, there are many things to consider, but first start with the quality and age of the hemp flower being used. Also, remember each strain will yield better at different temperatures. Experimenting with different pressing times, pressures, and temperatures can help optimize yields.
• Quality Deterioration: If the quality of the rosin deteriorates (e.g., less potent, harsher taste), it could be due to degradation from exposure to air, light, or improper storage temperatures. Ensure the rosin is stored correctly in airtight containers in a cool, dark place. Also, consider the age ofthe hemp material; fresher hemp tends to produce higher-quality rosin.

Developing a keen eye for these issues and knowing how to address them will significantly enhance the ability to produce high-quality rosin consistently. Remember, the key to mastering rosin production is practice, patience, and a willingness to learn and adapt.

Where to Purchase Hemp Flower Online for Rosin Making

CLICK HERE TO SHOP LAKELAND HEMP PRODUCTS

Whether a novice or an experienced rosin maker, using products from Lakeland Hemp, LLC (www.lakelandhemp.com) can significantly elevate your crafting experience. The combination of their high-quality, tested hemp and your newly acquired rosin making skills is a recipe for success.

Their commitment to quality is evident in every aspect of their operation. By choosing Lakeland Hemp, LLC, you’re not only getting a product that has been rigorously tested for purity and potency, but you’re also supporting sustainable farming practices.

Lakeland Hemp, LLC’s hemp is farmed on sustainable farms in Michigan, ensuring every product you receive is the result of environmentally friendly and responsible farming techniques. This commitment to sustainability not only benefits the environment but also contributes to the superior quality of their hemp. High-quality, sustainably farmed hemp directly translates to more effective and purer rosin and hash.

Remember, the world of hemp rosin and hash is full of potential and creativity. With the right techniques, tools, and quality hemp from reliable sources like Lakeland Hemp, LLC, you can master the art of rosin and hash making, enjoying the fruits of your labor in the most satisfying way.

Frequently Asked Questions

1. What safety precautions should I take when making rosin? Safety is paramount when making rosin. Always wear protective gloves and eyewear, especially when handling hot plates or presses. Ensure your workspace is well-ventilated to avoid inhaling any fumes. Be mindful of the high temperatures involved and handle all equipment with care to prevent burns.
2. Is making rosin legal? The legality of making rosin varies depending on your location and the type of plant material you are using. In regions where cannabis is legal, making rosin for personal use is typically allowed. However, it’s essential to check and adhere to your local laws, including those regarding the possession and processing of cannabis or hemp.
3. How can I ensure the highest quality in my rosin products? To ensure high quality, start with premium-grade hemp. The quality of the plant material directly affects the output. Use precise temperature and pressure settings on your rosin press for consistency. Also, ensure your equipment is clean and well-maintained to avoid contamination.
4. Can I make rosin from any hemp strain? Yes, you can make rosin from any hemp strain. However, different strains will yield varying amounts of rosin and can have different potencies and flavor profiles. It’s worth experimenting with different strains to find the ones that best meet your preferences.
5. What’s the best way to store rosin? Rosin should be stored in a cool, dark place to prevent degradation. Airtight containers, preferably made of glass, are ideal for storage. Avoid exposure to air and light to maintain the rosin’s potency and flavor.
6. How much hemp do I need to start making rosin? The amount of hemp needed depends on how much rosin you want to produce. As a general rule, a smaller amount of high-quality hemp can yield a sufficient amount of rosin for personal use. Remember, the yield also depends on the strain and quality of the hemp.
7. Are there any common mistakes to avoid when making rosin? A common mistake is using too much heat or pressure, which can degrade the quality of the rosin. Another mistake is not properly aligning the material in the press, leading to uneven extraction. Also, avoid using overly dry or old plant material, as it can affect the yield and quality.
8. Can rosin be used in edibles? Yes, rosin can be used in edibles. However, it needs to be decarboxylated first to activate the cannabinoids. This can be done by gently heating the rosin before incorporating it into your edible recipes.
9. Is there a difference in potency between rosin and other extracts? Rosin is a potent concentrate, more potent than the original plant material. Its potency can vary based on the strain and the efficiency of the extraction process. Compared to other extracts, rosin is unique because it’s solventless, which can result in a purer and more natural product.
10. How long does the rosin pressing process take? The pressing process itself is relatively quick, often taking only a few minutes per batch. However, the total time can vary depending on the amount being processed and the specific setup of your rosin press.

Remember, making rosin is both an art and a science, and practice, along with attention to detail, will enhance your skills over time.

 

Note: This guide is meant for informational purposes. Always comply with local regulations and laws, and prioritize safety in all DIY endeavors.

Safety and Legal Considerations: Always adhere to local laws regarding hemp and cannabis product creation. Ensure safety in handling equipment and heat. Be aware of age restrictions and compliance requirements.